034 Motorsport Track Density Motor Mount for Audi B5/B6/B7/C5 034-509-0007-TD

034Motorsport’s Density Line Mounts are the new standard in comfort and performance. Our mounts are redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts.

Street Density:
The Street Density Engine Mount Pair is manufactured from 50 durometer rubber, which is approximately 10% stiffer than stock. Since the mounts are also void-free and solid-filled, the resulting mount is approximately 25% stiffer than stock.The mount bases are made from steel, and are much stronger than the factory aluminum ones, to cope with the added stress of spirited driving.

The result is greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop, without any significant increase in noise, vibration, or harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.

Track Density:
The Track Density Engine Mount Pair is manufactured from 80 durometer rubber, which is approximately 90% stiffer than stock. Since the mounts are also void-free and solid-filled, the resulting mount is approximately 120% stiffer than stock. The mount bases are made from steel, and are much stronger than the factory aluminum ones, to cope with the added stress of spirited driving.

The result is a locked-down drivetrain, solid shifting, and virtually no wheel hop. Track Density Mounts will cause a noticeable increase in noise, vibration, and harshness (NVH) inside of the cabin.

Features:

< li >Manufactured from 50 Durometer(Street Density)or 80 Durometer(Track Density)Rubber with Void-Free Construction

< li >Reduced Drivetrain Slop

< li >Decreased Engine Movement Under Load

< li >More Direct Power Transfer

< li >Improved Shifting Feel

< li >Complete Drop-In Replacement of Factory Engine Mounts

< li >Sold Individually(One Vehicle Requires 2 Mounts)

Fitment:

< li >1996 – 2001 Audi A4 (B5) 1.8T / 2.8L

< li >2000 – 2002 Audi S4/RS4 (B5) 2.7T

< li >2002 – 2005 Audi A4 (B6) 1.8T / 3.0L

< li >2005 – 2008 Audi A4 (B7) 2.0T FSI / 3.2L FSI

< li >1998 – 2004 Audi A6 (C5) 2.7T / 2.8L / 3.0L

< li >2001 – 2003 Audi Allroad (C5) 2.7T

< li >1998 – 2005 Volkswagen Passat (B5 / B5.5) 1.8T / 2.8L / 4.0L W8

Notes:

< li >Sold individually. One vehicle will require 2 mounts!

< li >The nuts for these mounts should be torqued to the factory specification of 25 Nm (approximately 18.5 ft. lbs.). Overtightening these nuts can cause damage to the mount!

< li >Tiptronic vehicles with active mounts require two of our Resistor Bypasses to prevent the MIL from illuminating.

WARNING: Cancer and Reproductive Harm