034 Motorsport 034-509-1000-SD Dogbone Mount, MKIV VW & 8L/8N Audi

034Motorsport’s Density Line Mounts are the new standard in comfort and performance. Our mounts are redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts.

Street Density:
The Street Density Engine Mount Pair is manufactured from 50 durometer rubber, which is approximately 25% stiffer than stock. Since the mounts are also void-free and solid-filled, the resulting mount is approximately 60% stiffer than stock. The cast aluminum mount bodies have also been redesigned to cope with the added stress of spirited driving.

The result is greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop, without any significant increase in noise, vibration, or harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.

Track Density:
The Track Density Engine Mount Pair is manufactured from 80 durometer rubber, which is approximately 90% stiffer than stock. Since the mounts are also void-free and solid-filled, the resulting mount is approximately 120% stiffer than stock. The cast aluminum mount bodies have also been redesigned to cope with the added stress of spirited driving.

The result is a locked-down drivetrain, solid shifting, and virtually no wheel hop. Track Density Mounts will cause a noticeable increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.

Features:

< li >Manufactured from 60 Durometer (Street Density) or 80 Durometer (Track Density) Rubber with Void-Free Construction

< li >Reduced Drivetrain Slop

< li >Decreased Engine Movement Under Load

< li >More Direct Power Transfer

< li >Improved Shifting Feel

< li >Complete Drop-In Replacement of Factory Dogbone Mount

Fitment:

< li >1996 – 2003 Audi A3/S3 (8L) 1.8T (180HP & 225HP)

< li >1998 – 2006 Audi TT (8N) 1.8T (180HP & 225HP), 3.2L VR6

< li >1999 – 2005 Volkswagen Golf / GLI / GTI / Jetta / New Beetle (MkIV) 1.8T, 2.0L, TDI, 2.8L & 3.2L VR6

Note: The black steel bracket on the small end of the dogbone mount is held on from the factory with a very light crimp simply to keep the bracket with the mount, it serves no structural purpose. It is possible and normal for the bracket to come loose during shipping or transpiration, simply install the bracket in the mount in the event this happenes, the bolts are what hold the bracket in place, not the superficial crimp. Enjoy your upgraded Dogbone mount and the more controlled engine movement.

WARNING: Cancer and Reproductive Harm