Full Race M10 Inconel Turbo Stud Hardware Kit FR-UNI-TSHK-M10

Tired of turbos loosening on the manifold? Professional and amateur racing teams agree: Full-Race’s M10 turbo hardware is the solution. Designed specifically for high-performance turbocharged applications, this high-quality A286 stud is heat-treated, solution annealed, and precipitation hardened. The nut is silver-plated A4-70 grade, allowing it to be used without anti-seize (keeps long-term service removal possible).

Recommended for use in twin scroll applications with our Inconel MLS T4 gasket. By using 1.5 (standard pitch) on the manifold side and 1.25 (fine pitch) on the turbo side, the standard pitch thread will stay put in the manifold while the fine pitch 1.25 Inconel nut will be easy to remove without dislodging/unthreading the stud from the flange. This works perfectly with your existing turbo manifolds which typically use 3/8-16 hardware (the old industry standard). All you need to do is run a 10mm x 1.5 thread chaser through the 3/8-16 threads.

Features:

< li >1.5 Thread Pitch Manifold / 1.25 Thread Pitch Turbo Hardware

< li >Stud torque spec: 38 Nm +/- 3 Nm (28 ft/lbs)

< li >Nut torque spec: 57 Nm +/- 3 Nm (42 ft/lbs)

WARNING: Cancer and Reproductive Harm